Odda Technology as rents facilities and equipment from Odda Coating Technology as from May 2022 and will operate the coating activity from this time.

The operation of the coating activities is based on:

•                       Frosio inspector level 3
•                       Existing procedures
•                       Same operator (s)
•                       Same premises and equipment

Services

BLASTING

We offer blasting according to ISO 8501 or according to the customer's specifications.

We have one of the country's best blast cabins and blasting with alumina and steel grit. The cabin has a separation filter and recycling.

Documentation and inspection by Frosio certified personnel.

Size of cabin: 7700x3900x2900mm

XYLAN

Xylan is used for extreme needs of surface protection, such as at great depths.

There are different color choices that also provide good visibility under water. Xylan has the lowest known coefficient of friction of all types of surface treatments. Stable and efficient at low and high temperatures.

Xylan has lubricating properties and protects well against corrosion, preferably in combination with zinc-phosphate pretreatment. Xylan has been used in the offshore industry for 30-40 years.

ZINC PHOSPHATING

Zinc phosphate gives a fine and homogeneous surface. This surface treatment also acts as a primer (pre-treatment) and provides a better adhesion for Xylan.

We have 6 tanks in use for:

TANK 1: Degreasing

TANK 2 and 3: Rinsing step

TANK 5: Zinc phosphating

TANK 6 and 7: Rinsing step

Each of the tanks holds about 18,000 liters and has a length of 4 meters, a width of 2 meters and a depth of 2.3 meters.

We also have a drying oven for fast and safe drying of parts after zinc phosphating.

METALIZATION

We perform metallization with Zinc (TSZ- Thermally Sprayed Zinc) and with Aluminum (TSA- Thermally Sprayed Aluminum)

The purpose of metallization is to achieve a robust and durable corrosion protection on particularly exposed structures.

Common to metallized surfaces is that they provide long maintenance intervals and thus reduce service life costs.

We have approved procedures in accordance with Norsok M-501, system 2A or 2B.

See some of the process here:

https://www.youtube.com/watch?v=9r9BtFUp-C8

For orders or questions, send an email to:

[email protected]